CONFIGURATION M2488 USER’S GUIDE
4-14 CG00000-011403 REV. A April 1997
* Refer to the M2488 Product Guide, CG00000-0115xx, Chapter 5 for Mode Page 00 information.
a. If there is an outstanding SCSI command or if there is a tape loaded in the tape drive then Off-line
mode cannot be entered.
Step 2. Press the START push-button until MODE PGS is displayed. The information available is
described in Table 4-15.
Step 3. Press the TEST pushbutton.
Step 4. The first item, TAPEUNIT, is displayed. Press TEST to view the selected mode pages for
the Tape Unit or START to view next option.
Table 4-15. Information Description
OPTION DESCRIPTION
TAPEUNIT Select sub-menu to modify Tape unit Mode pages (sub-menu
described in Table 4-16)
MED-CHGR Select sub-menu to modify Medium-Changer Mode pages (sub-menu
described in Table 4-17)
Table 4-16. Tape Unit Mode Pages Menu
OPTION DESCRIPTION
PAGE 00 Display and/or Modify Tape-Unit Mode page 00 (sub-menu
described in Table 4-18)
PAGE 01 Display and/or Modify Tape-Unit Mode page 01
PAGE 10 Display and/or Modify Tape-Unit Mode page 10
Table 4-17. Medium-Changer Mode Pages Menu
OPTION DESCRIPTION
PAGE 00 Modify Medium-Changer Mode page 00 (sub-menu described in
Table 4-18)
Table 4-18. Settable Mode Page 00 Menu *
OPTION SETTINGS DESCRIPTION
DEFAULT
SETTINGS
PG00/B02 BYT02:00 Mode Page 00, Byte 2 00
PG00/B03 BYT03:00 Mode Page 00, Byte 3 00
PG00/B04 BYT04:00 Mode Page 00, Byte 4 FE
: : : :
PG00/Bnn BYTnn:00 Mode Page 00, Byte nn 00
PG00:WTR WTROM: Y
N
If Y, the setting data is written to nonvolatile memory.
If N, the setting data is not written to nonvolatile memory.
Y
To Next Page
Loading...
