Fujitsu M2488 - 5-10.4 Eject the FACL Magazine; Figure 5-7. FACL Magazine Mount

M2488 USER’S GUIDE OPERATING PROCEDURES
April 1997 CG00000-011403 REV. A 5-11
5-10.4 Eject the FACL Magazine
Refer to Figure 5-7.
Figure 5-7. FACL Magazine Mount
STEP ACTION
1
Press
RESET
,
AUTOLOAD OPERATION INTERRUPTED
is displayed.
2 Press
RESET
.
3 Open the door (see paragraph 5-10.1) and press PUSH on the magazine mounting tray. The mount-
ing tray moves forward.
4 Hold the magazine handle and remove the magazine from the mounting tray.
5 Press PUSH on the mounting tray until the device locks into the FACL.
6 Close the door (see paragraph 5-10.1).
push
mounting tray