Fujitsu M2488 - Controls and Indicators; Introduction; M2488 Controls and Indicators; 3-2.1 M2488 Front Panel Controls and Indicators

M2488 USER’S GUIDE CONTROLS AND INDICATORS
April 1997 CG00000-011403 REV. A 3-1
CHAPTER 3
CONTROLS AND INDICATORS
3-1 INTRODUCTION
The following paragraphs illustrate and describe all controls, connectors, and indicators on the M2488
tape drive and on the medium changers. Use the index numbers from the figures to locate the informa-
tion in the tables.
3-2 M2488 CONTROLS AND INDICATORS
3-3 AUTOMATIC CARTRIDGE LOADER CONTROLS AND INDICATORS (OPTIONAL
EQUIPMENT)
3-4 FLUSH-MOUNTED AUTOMATIC CARTRIDGE LOADER CONTROLS AND INDICA-
TORS (OPTIONAL EQUIPMENT)
3-2 M2488 CONTROLS AND INDICATORS
The following paragraphs illustrate and describe front, rear and bottom of the M2488 tape drive.
3-2.1 M2488 Front Panel Controls and Indicators
The M2488 front panel is illustrated in Figure 3-1 and described in Table 3-1.
Figure 3-1. M2488 Front Panel Controls and Indicators
BOT EOT
ATTN.
SEL.
COMP.
1
SHIFT TEST START UNLOAD
RESET
2
3
4
5
67
8
9
10
11
12