To Next Page

To Previous Page

TX100 S3 Core Edition Operating Manual 11

1 Introduction

The PRIMERGY TX100 S3 Core Edition server is an Intel-based server for

workgroups and small networks. The server is suitable for use as a file server

and also as an application, information or Internet server.

Thanks to its highly developed hardware and software components, the

PRIMERGY TX100 S3 Core Edition server offers a high level of data security

and availability.

The “headless” operating concept enbles you to run and maintain your server

without a monitor, keyboard or mouse attached, saving up to 37 percent in

acquisition costs.

The PRIMERGY TX100 S3 Core Edition server comes pre-installed with the

Windows Server 2008 R2 Foundation operating system for small businesses

with up to 15 client users.

Moreover, the TX100 S3 Core Edition is incredibly silent making it an excellent

choice for any office environment.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your server.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY TX100 S3 Core Edition into

operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

Fujitsu PRIMERGY TX100 S3 Core Edition User Manual

Other manuals for Fujitsu PRIMERGY TX100 S3 Core Edition