EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY TX100 S3 Core Edition

Fujitsu PRIMERGY TX100 S3 Core Edition User Manual

Fujitsu PRIMERGY TX100 S3 Core Edition
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
TX100 S3 Core Edition Operating Manual 39
Hardware installation
5.2 Setting up the server
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see section "Unpacking the server").
Ê Set up the server.
V CAUTION!
The device must be protected from direct sunlight.
The required minimum distances for operation and maintenance
areas must be adhered to.
The server must be accessible at the rear for connection to other
devices (e.g. memory subsystem).
The mains plug must be accessible easily and safely.
There must be a clearance of at least 200 mm in front of and
behind the server to ensure adequate ventilation of the
subsystem.
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 40 and "Notes on connecting / disconnecting cables" on
page 42.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 41).

Table of Contents

Other manuals for Fujitsu PRIMERGY TX100 S3 Core Edition

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX100 S3 Core Edition and is the answer not in the manual?

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY TX100 S3 Core Edition
CategoryServer
LanguageEnglish

Related product manuals