Fujitsu PRIMERGY TX100 S3 Core Edition User Manual

TX100 S3 Core Edition Operating Manual 73
Starting up and operation
6.5.2 Factory reset
Ê Establish a VNC connection as described in section "Accessing the server
using a VNC connection" on page 61.
Figure 22: Maintenance and Recovery Manager user interface - Factory reset
Ê Ensure that the Maintenance & Recovery DVD is in your DVD drive!
Ê Select Create RAID and Reinstall from the Recovery section in the
Maintenance and Recovery Manager menu.
V CAUTION!
All user data will be lost when resetting your server. The existing
RAID configuration including all partitions on all hard disk
drives will be destroyed and replaced.
Ensure to backup your data before proceeding. If the operating
system is no longer accessible, use the VNC File Transfer
functionality to backup your files. The files will be transferred using
the existing VNC connection.

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English