Fujitsu PRIMERGY TX100 S3 Core Edition User Manual

TX100 S3 Core Edition Operating Manual 15
2 Functional overview
This section provides information on the features and technical data of the
PRIMERGY TX100 S3 Core Edition server. For information on key
characteristics and layout of the system board, see "System Board D3009 for
PRIMERGY TX100 S3"Technical Manual.
2.1 Features
Intel
®
Celeron
®
, Xeon
®
, Pentium
®
, or Core i3 processor
The server has an Intel
®
Celeron
®
, Xeon
®
, Pentium
®
, or Core i3 processor for
high-speed data processing.
System board
System board features are described in the "System Board D3009 for
PRIMERGY TX100 S3" Technical Manual.
Hard disk drives
The PRIMERGY TX100 S3 Core Edition server can accommodate up to four
SAS / SATA hard disk drives. By default, it comes equipped with two to four 3.5-
inch SATA hard disk drives.
Onboard SATA controller
The onboard SATA controller supports up to four SATA hard disk drives. The LSI
Embedded MegaRAID software (SATA Software RAID) supports RAID levels
0,1 and 10.
By default, two hard disk drives (drives 1 and 2) are combined into a RAID 1
array.
I Configuring additional hard disk drives (drives 3 and 4) requires
ServerView RAID Manager. For further information, please refer to the
"ServerView Suite RAID Management" user manual, available on your
ServerView Suite DVD 2 or from the Fujitsu Technology Solutions
manuals server at http://manuals.ts.fujitsu.com.

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English