TX100 S3 Core Edition Operating Manual 51
Starting up and operation
6.3.3.2 Running the Remote Desktop software
Ê On your client computer, click Start, point to All Programs, and then point to
Accessories.
Ê In the Accessories menu, point to Communications, and then click Remote
Desktop Connection.
I If the Remote Desktop Connection shortcut is not listed in the start menu
at the specified location, proceed as follows:
Ê On your client computer, click Start, point to Run, and then type
mstsc in the Open box.
Ê Click OK.
The Remote Desktop Connection window will open.
Ê In the Computer box, type the default IP address or the default computer
name of your PRIMERGY TX100 S3 Core Edition server.
Ê Click Connect.
Ê Click on the Administrator icon, type the default password of the Headless
server into the password field, and press [Enter] to log into the preinstalled
operating system.
You will be taken to the Initial Configuration Tasks pane.
Default user name: Administrator
Default password: TX100preinstalled
To Next Page
Loading...
