TX100 S3 Core Edition Operating Manual 53
Starting up and operation
6.3.4.1 Language Customization
I This section does not apply to the Japanese market.
By default, the operating system comes with six preinstalled language
options: English, Japanese, German, Spanish, French, and Russian.
If your preferred language is among the preinstalled language options,
proceed as follows:
Ê Under Language Customization, click Click here to select already installed
Language.
The Region and Language windows will appear.
Ê From the Keyboards and Languages tab, choose your language and press OK.
Ê Log out and log in again for the new language settings to take effect.
If your preferred language is not among the preinstalled language
options, proceed as follows:
Ê Under Language Customization, click Click here to install additional Language.
The Region and Language windows will appear.
Ê Choose your preferred language from the subsequent menu and click Install
language.
Ê Wait until the installation process is complete.
The Region and Language windows will appear.
Ê From the Keyboards and Languages tab, choose your language and press OK.
Ê Log out and log in again for the new language settings to take effect.
6.3.4.2 Network configuration (optional)
If your server is already successfully operating in the destined network with a
DHCP assigned IP address, no further configuration steps are required. Please
proceed to section "Providing computer name and domain" on page 55.
If your server has been connected to a client computer outside the destination
network for configuration purposes, you will have to configure your TCP/IP
network settings to match the destination network.
To enable DHCP, assign a static IP address or change other TCP/IP settings,
follow these steps:
To Next Page
Loading...
Need help?
General