First-time setup of your d evice
Choose a location
ChoosealocationSetupACadapter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device o r the AC adapter on a heat-sen sitive surface.
The surface could be damaged as a result.
• Never place the device on a s oft surface (e.g. carpeting, upholstered furniture,
bed). This can result in damage caused by overheating.
• The und erside of the de vice heats up during normal operation. Prolonged contact
with the skin can become u npleasan t or even result in burns.
• Place the device on a stable, fl at, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other ob jects at least 100 mm / 4 inches away from the device
and its AC adapter to ensu re ade quate ventilation.
• Do not exp ose the device to extreme environmental c onditions. Protect
the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Observe the safet
y notes in the enclosed "Safety/Re gulations" manual.
ThesuppliedACc
able conforms to the requirements of the country in which
you purchased yo
ur device. Ma ke sure that th e AC cable is approved for
use in the count
ry in which you intend to use it.
2
► Open the cover of the DC jack
socket (DC IN).
► Connect the AC cable (1) to the AC adapte r.
► Plug the AC cab le (2) into a power outle t.
► Connect the AC adapter cable (3) to the
DC jack socket ( DC IN) of the device.
18 Fujitsu
To Next Page
Loading...
Need help?
General