Technical data
WLAN specifications
Type of ne twork
Integrated Dual-Band Wireless-MITSUMI
DWM-W095A device conforms to IEEE
8
02.11a, 802.11b/g, and 802.11n, Wi-Fi
based*.
Transfer rate
(Automatic switching) IEEE802.11 a and g:
54 Mbps max. data rate; IEEE80 2.11n: 300
Mbps max. data rate
Active frequency • 802.11n: 2.4 GHz or 5 GHz
• 802.11b/g: 2400~2473 MHz
• 802.11a: 4900 ~ 5850 MHz
Typical operating dis
tances**
• 802.11a: 40 ft. (12 m) @
54 Mbps; 300 ft.
(91m)@6Mbps
• 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91m)@1Mbps
• 802.11g: 100 ft. (3
0 m ) @ 54 Mbps; 300 ft.
(91m)@1Mbps
• 802.11n: Estimated double the operating
distance of 802.11g and 802.11a in their
respective frequencies.
Number of channels
• 802.11a: 8 independent channels
• 802.11b/g: 11 c
hannels, 3 non-overlapping
channels
• 802.11n: Channel bonding takes two of
the non-overlapping 20MHz channe ls and
combines it into one 40MHz channel. It is
actually 12 non-overlapping channels with
channel bonding and 24 without. Also, it is
1 non-overlapping channel in 2.4GHz when
channel bonding is used
Security Encryption Types - WEP, TKIP, AES***, WPA 1 .0
and W PA 2 .0 compliant
Encryption Key lengths Supported: 64 bits and
128 bits
Maximum recommend ed number of computers
to be connected over wireless LAN (during ad
hoc connection)
10 units or less ****
* “Wi-Fi based” indicates tha t the interconnectivity test of the organization which guarantees the
interconnectivity of wireless LAN (Wi-F i Alliance) has been passed.
** The communication ranges shown above w ill inc rease or decrease depending on factors such
as number of walls, re flective material, or interference from external RF sources.
*** Encryption with network key (WEP) is perfo rmed using the above number of bits, however,
users can set 40 bits/ 104 bits after su btracting the fixed leng th of 24 bits.
**** Depen ding on practical environments, the allowable number of computers to be connected
may be decreased.
80 Fujitsu
To Next Page
Loading...
