What to do if Smart Card reader is not recognized on my Fujitsu Tablet?
If the Smart Card reader on your Fujitsu Tablet is not recognized, ensure the Smart Card is inserted with the chip facing upwards. Also, verify that your Smart Card complies with the ISO standard 7816-1, -2, -3 and -4.
Why is my Fujitsu Tablet making an acoustic warning?
If you hear a beep every few seconds from your Fujitsu Tablet, it means the battery is almost flat. Charge the battery.
How to fix the error message 'Failure Fixed Disk n' on my Fujitsu STYLISTIC Q704?
If you encounter the error message 'Error message: Failure Fixed Disk n' on your Fujitsu Tablet, start the BIOS Setup (Primary Master submenu) and select the correct settings for the hard disk drive.
How to fix the error message 'System CMOS checksum bad - Default configuration used' on my Fujitsu STYLISTIC Q704 Tablet?
If you see the error message 'Error message: System CMOS checksum bad - Default configuration used' on your Fujitsu Tablet, switch the Tablet PC off and then on again. In the BIOS Setup, select the Exit menu, then select the entry Load Setup Defaults, and select OK.
What to do if I get the error message 'Keyboard controller error' on my Fujitsu STYLISTIC Q704?
If you encounter the error message 'Error message: Keyboard controller error' on your Fujitsu Tablet, switch your Tablet PC off with the ON/OFF button, wait 3 - 5 seconds, and switch the Tablet PC on again.
How to resolve the 'Keyboard error' message on my Fujitsu STYLISTIC Q704 Tablet?
If you see the error message 'Error message: Keyboard error' on your Fujitsu Tablet, check the connection and reboot the Tablet PC if you are using an external keyboard.
What to do if I get the error message 'Stuck key' on my Fujitsu STYLISTIC Q704 Tablet?
If you encounter the error message 'Error message: Stuck key' on your Fujitsu Tablet, make sure that no key is pressed.
What to do if I get the error message 'Operating system not found' on my Fujitsu Tablet?
If you see the error message 'Error message: Operating system not found' on your Fujitsu Tablet, check in the BIOS Setup whether your hard disk has been set correctly and make sure that the operating system is installed on the corresponding drive.
What to do if I get the error message 'Press to resume, to SETUP' on my Fujitsu Tablet?
If you see the error message 'Error message: Press to resume, to SETUP' on your Fujitsu Tablet, press the Alt tablet button to boot the operating system.
What to do if Fujitsu Tablet PC does not start after switch on?
If your Fujitsu Tablet PC doesn't start, try these steps: Ensure the battery is charged. Connect the AC adapter to the Tablet PC. Check that the AC adapter is properly connected to the Tablet PC. Then, switch the Tablet PC on.
General| LED backlight | Yes |
|---|---|
| Pixel density | 176 ppi |
| Display diagonal | 12.5 \ |
| Touch technology | Multi-touch |
| Touchscreen type | Capacitive |
| Display brightness | 352 cd/m² |
| Native aspect ratio | 16:9 |
| Display number of colors | 16.78 million colors |
| Bus type | DMI2 |
| Stepping | D0 |
| Tjunction | 100 °C |
| Processor code | SR1EA |
| Processor cache | 4 MB |
| Processor cores | 2 |
| Processor model | i7-4600U |
| System bus rate | 5 GT/s |
| Processor family | Intel® Core™ i7 |
| Processor series | Intel Core i7-4600 Mobile series |
| Processor threads | 4 |
| Processor codename | Haswell |
| Processor frequency | 2.1 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor package size | 40 x 24 x 1.5 mm |
| Processor front side bus | - MHz |
| Processor boost frequency | 3.3 GHz |
| Processor operating modes | 64-bit |
| PCI Express configurations | 4x1, 2x4 |
| Supported instruction sets | AVX 2.0, SSE4.1, SSE4.2 |
| Thermal Design Power (TDP) | 15 W |
| Internal memory | 8 GB |
| Memory clock speed | 1600 MHz |
| Internal memory type | LPDDR3-SDRAM |
| Storage media | SSD |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Maximum memory card size | 64 GB |
| Internal storage capacity | 256 GB |
| Graphics card | HD Graphics 4400 |
| Audio system | Realtek ALC283 |
| Flash type | LED |
| Rear camera type | Single camera |
| Rear camera resolution (numeric) | 5 MP |
| Front camera resolution (numeric) | 2 MP |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Bluetooth version | 4.0 |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| Wi-Fi data rate (max) | 300 Mbit/s |
| Microphone in | No |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 0 |
| Micro-USB 2.0 ports quantity | 1 |
| Device type | Tablet PC |
| Form factor | Convertible (Detachable) |
| Product color | Black |
| Sustainability certificates | RoHS, ENERGY STAR |
| Certification | CB, FCC Part 15 B, cUL, FCC Part 15 C, FCC Part 15 E, FCC Part 22, FCC Part 24, FCC Part 27, ICES-003 Class B, RSS-210, UL |
| Position location | - |
| Password protection type | BIOS, Supervisor, User |
| Platform | Windows |
| Trial software | McAfee Internet Security |
| Bundled software | Adobe Reader Fujitsu LIFEBOOK Application Panel Fujitsu Display Manager ShockSensor Utility Power Saving Utility Fujitsu Plugfree Network EasyGuide online user documentation |
| Operating system installed | Windows 8.1 Pro |
| Battery voltage | 10.8 V |
| Battery capacity | 4250 mAh |
| Battery life (max) | 10 h |
| Battery recharge time | 2.3 h |
| Number of battery cells | 3 |
| AC adapter power | 65 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 3.42 A |
| AC adapter output voltage | 19 V |
| Storage temperature (T-T) | -15 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 8 - 85 % |
| Operating relative humidity (H-H) | 20 - 85 % |
| Processor ARK ID | 76616 |
| Processor socket | BGA 1168 |
| Intel TSX-NI version | 0.00 |
| Intel ME Firmware Version | 9.5 |
| Intel Identity Protection Technology version | 1.00 |
Weight and Dimensions| Depth | 199.3 mm |
|---|---|
| Width | 309.6 mm |
| Height | 11.9 mm |
| Weight | 998 g |
Contact methods and required information for customer support.
Identification of ports and indicators on the front of the device.
Details of ports and buttons located on the left side.
Details of ports and features located on the right side.
Identification of ports and features on the back of the device.
General safety guidelines for proper device usage.
Precautions for handling the device and its materials.
Safety precautions when using wireless components.
Steps and precautions for initial device setup.
Step-by-step instructions for connecting the AC adapter.
How to power on the device for initial setup.
Instructions for turning the tablet device on.
Steps for correctly shutting down the tablet device.
Basic touch gestures for device interaction.
Describes actions performed using screen edge swipes.
How to use press and hold for context menus.
Describes tapping, scrolling, and moving objects with fingers.
How to select, start, move, and open menus using fingers.
How to use the stylus for writing, selecting, and drawing.
Recommendations for proper stylus handling and care.
Steps to calibrate the stylus for accuracy.
How to charge and care for the battery.
Guide to utilizing power-saving settings for efficiency.
Details about the SIM card and its correct format.
Step-by-step instructions for inserting a SIM card.
How to enable or disable wireless features.
How to connect to a local area network using Ethernet.
Identification of ports and connectors on the docking cradle.
Steps to connect the tablet to the docking cradle.
Steps to dock the tablet with the keyboard cover.
Identification of ports on the keyboard docking station.
Steps to set up and configure the fingerprint sensor.
How to set supervisor and user passwords in BIOS.
Procedures for modifying or deleting BIOS passwords.
How to enable password protection at system boot time.
Steps to activate and deactivate hard disk passwords.
Procedures for managing the TPM security chip.
Procedures for saving or discarding changes and exiting BIOS.
Initial steps to take when a fault occurs.
Troubleshooting device startup problems.
Solutions for when the tablet unexpectedly stops functioning.
Steps to configure wireless network connectivity.
Common WLAN issues and their solutions.
Overview of creating recovery media for the system.
Detailed steps for creating recovery disks.
Using tools to recover when the hard drive is accessible.
Steps to restore the recovery image from a hidden partition.
Steps for performing a full hard drive recovery.
Detailed steps for full hard drive recovery using tools.
Steps to install essential access software from hidden partition.
How to get the latest driver updates using FSDM.
To Next Page