Appendix
Appendix
Before U s ing the Optional Wireless LAN
This manual describes the procedures required to properly set up and configure the optional
integrated Wireless LAN Mini-PCI device (referred to as "W LAN device" in the rest of the
manual). Before using the W LAN device, read this m anual carefully to ensure its correct
operation. Keep this manual in a safe place for future reference.
Wireless LAN Dev ice s Co vered by this Document
This document is applicable to systems containing the following device:
• Intel® Dual Band Wireless 7265NGW
Characteristics of the WLAN Device
• The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.
• The WLAN devices operate in license-free RF band s, eliminating the n eed to procure
an FCC operating l icense. The WLAN operates in the 2.4GHz Industrial, Scientific,
and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz
Unlicensed Na tional Information Infrastructure (UNII) bands.
• The WLAN devices are capable of five operating modes, IEEE802.11a, IEEE802.11 ac,
IEEE802.11b, IEEE802.11g, and IEEE802.11n.
• The WLAN device is Wi-Fi certified and operates (as applicable) at a t he maximum
data rate of 450 Mbp s in IEEE802.11n mode (300 Mbps in this co n figuration); 54 Mbps
in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode .
• The WLAN devices support the following encryption methods - WEP,
TKIP, CKIP, and AES encryption.
• The Wireless LAN devices are compliant with the following standards: WPA,
WPA2, CC X 1.0, C CX2.0, CCX3.0, and CCX4.0.
110 Fujitsu