Accessories for yo ur Tab let PC (opti
onal)
Connecting the Tab let PC to the cradle
It is possible to connect the Tablet PC to the cradle while it is running.
Disconnect the AC adapter from the Tablet PC be fore connecting
the Tablet PC to the cradle.
When the Tablet PC is connected to the cradle, you must conn ect
the AC adapt er to the cradle.
Cradle
► Remove the AC plug of the AC adapter from the power outlet.
► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.
1
2
4
3
Your cradle is supplied with a s eparate AC adapter (19 V, 3.42 A ). Make
sure that you only use this AC adap ter for the cradle.
► Position the Tablet PC so that it lies against the storage surface of the cradle.
48 Fujitsu
To Next Page
Loading...
