Working with the Tab let PC
Removing a SIM ca rd
► Open the slot cover.
3
a
2
1
► Press the edge of the SIM card so that the SIM card jumps slightly out of the slot (1).
► Pull the SIM card out of the slot (a) in the direction of the arrow (2).
► Close the slot cover (3).
Wireless LAN/Bluetooth/4G/LTE/NFC wireless
components
The installation of wireless components not approved by Fujitsu w ill
invalidate the certifications issued for this device.
Switching the wireless components on a nd off
The wireless c omponen ts are switched on and off using the appropriate
functions of the operating system.
► To switch wireless components on and off individually, select Settings – Change
PC settings – Network – Airplane mode.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating syste m.
Fujitsu 43
To Next Page
Loading...
