Connecting e xternal devices
Connecting external devices
Under all circumstances, please obse rve the safety notes provided in the
"
Important notes", Page 14 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the do cume ntation supplied with the device you wish to conn ect.
Never connect or disconnect cables during a thundersto rm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation s upplied with your external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting an external m onitor
Micro HDMI port
HDMIport
The micro HDMI port on your device can be used to co nnect an exte rnal amplifier,
LCD TV or a p lasma TV with an HDMI connection.
► Connect the data cable to the
external device .
► Connect t he data cable to the micro
HDMI port.
Some LCD televisions have only two speakers/speaker ports and therefore
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you
must change th e HDMI sound settings accordingly.
You can find the s ettings under Control Panel - H ardware and Sound. Deactivate the
settings for DTS Audio and Dolby Digital to e nable playback of HDMI sound.
Fujitsu 79