b. A progress bar appears, followed by the EULA screen. Agree to the EULA.
c. On the Recovery Tool - Partition Creation screen, move the slider to set
disk size, and then click [OK].
d. Click [Yes] in the Partition Creation confirmation dialog.
WARNING: It is highly recommended that you send your product to Fujitsu Service to
replace a hard drive. A mistake could possibly destroy your computer, your new hard
drive or both.)
Recovering your recovery image using recovery and
utility (for new hard drive or non-bootable hard drive)
If you have installed a new hard drive or your hard drive is not bootable, perform the
following steps.
Note: You will need the Bootable disc and Recovery Image disc set for this recovery.
1. Power on your system. When the Fujitsu logo appears on the screen, press the
[F12] key.
2. Insert the bootable disc in your DVD drive, then click [OK].
3. Highlight the CD/DVD option from the Boot Menu and press [Enter].
4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press [Enter].
While the files are being loaded from the disc, the Fujitsu logo screen appears
followed by a progress bar at the bottom of the screen.
5. Choose your language, if necessary.
6. Three tool options appear: Diagnostics, Recovery and Utility. Select [Recovery].
■ For Windows 8.1: Select [Restore full hard drive]
■ For Windows 7: Select [Restoring the Factory Image (full hard drive recovery)]
7. Click [Next] to confirm full hard drive restoration. All data on HDD will be deleted.
8. Agree to the EULA by selecting the [Agree] option and clicking [Next].
9. Click [Next] on the Recovery Disc Check screen to verify that the bootable disc
has been inserted into the optical drive.
122
Fujitsu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
