If no data is stored, the next screen will appear:
If the viscometer detects the USB stick connected to the suitable USB connector the download will start,
showing this text on the screen:
If a USB-memory has been used to download the data, the viscometer will create a folder named
‘FUNGILAB’ in its root directory. The file or files resulting from the download will be stored in this folder. The
first file is named ‘FDL0’ and the following ones are ‘FDL1’, ‘FDL2’ and so on. The files are saved in a CSV
(Comma-Separated Values) format, so they can be opened using a plain text editor or a spreadsheet. An
example of a file generated by this feature can be seen in the following screenshot:
To Next Page
Loading...
Need help?
General
