3. Safety Symbols and Precautions
Safety Symbols: The following symbols are used in this instruction manual:
This symbol warns of an operational, practical, or similar procedure that, if it is not
carried out properly, may damage the equipment
This symbol indicates hazardous voltages may be present
This symbol indicates that additional information has to be considered
Precautions
If this instrument is used in a not specified by the manufacturer manner, the protection
provided by the instrument may be impaired.
This instrument is not intended for use in a potentially hazardous environment.
In case of emergency, switch off the instrument and, after that, disconnect the electrical
cord from the wall outlet.
The user should ensure that the substances placed under test do not release
poisonous, toxic or flammable gases at the temperatures which they are subjected to
during testing.
4. Utilities
Input Voltage: Universal Power Supply (100-240V)
Input Frequency: 50 / 60 Hz
Power Consumption: 15 VA
Main supply voltage fluctuations cannot exceed ±10% of the nominal supply voltage
5. Specifications
Speeds: 0.3 – 100 RPM
Viscosity Accuracy: ±1.0 % of full scale range
The use of accessory items will have an effect on the measurement
accuracy
Viscosity Repeatability: ±0.2 % of full scale range
Temperature Accuracy: ±0.1 °C | -40 °C to 300 °C (-40 °F to 572 °F)
Operating Environment: +5 °C to 40 °C temperature range (41 °F to 104 °F)
Non condensing humidity
To Next Page
Loading...
Need help?
General
