Furuno FAR-1513 - How to Erase Waypoints; How to Display the Waypoint List; How to Show;Hide the Waypoint Name;Number

5. VIDEO PLOTTER OPERATION
5-7
5.5.2 How to erase waypoints
1. Open the [MAIN MENU].
2. Select [NAVLINE•WPT], then push the ADJUST knob.
3. Select [WPT SET], then push the ADJUST knob.
4. Select [WPT NO. SELECT], then push the ADJUST knob.
5. Select [CLEAR DATA], then push the ADJUST knob.
6. Select [YES] or [NO] as appropriate, then push the ADJUST knob.
7. Close the menu.
5.5.3 How to display the waypoint list
1. Open the [MAIN MENU].
2. Select [NAVLINE•WPT], then push the ADJUST knob.
3. Select [WPT LIST], then push the ADJUST knob.
4. Close the menu.
5.5.4 How to show/hide the waypoint name/number
1. Open the [MAIN MENU].
2. Select [NAVLINE•WPT], then push the ADJUST knob.
3. Select [DISP WPT NO.] or [DISP WPT NAME] as appropriate, then push the AD-
JUST knob.
4. Select [YES] to show the waypoint name/number, or [NO] to hide the waypoint
name/number, then push the ADJUST knob.
5. Close the menu.