WARNINGWARNING
WARNINGWARNING
Before servicing the radar, turn
off the appropriate external
breaker.
ELECTRICAL SHOCK HAZARD.
Do not open the equipment.
Turn off the radar power switch
before servicing the antenna
unit. Post a warning sign near
the switch indicating it should
not be turned on while the
antenna unit is being serviced.
Only qualified personnel should
work inside the equipment.
Use the proper fuse.
Use of a wrong fuse can result
in damage to the equipment or
cause fire.
Prevent the potential risk of being
struck by the rotating antenna
and exposure to RF radiation
hazard.
Do not place liquid-filled con-
tainers near the equipment.
Fire or electrical shock can result
if a liquid spills into the equipment.
Do not place operate the equip-
ment with wet hands.
Electrical shock can result.
Keep heater away from equipment.
Heat can alter equipment shape
and melt the power cord, which
can cause fire or electical shock.
Do not disassemble or modify
the equipment.
Fire, electrical shock or serious
injury can result.
Immediately turn off the power
at the ship’s mains switchboard
if water leaks into the equip-
ment or the equipment is emit-
ting smoke or fire.
Continued use can cause fatal
damage to the equipment.
Power is not removed from the
radar simply by turning off its
power switch.
To Next Page
Loading...
