Furuno FS-5000 - Page 395

REMOTE
I1-4
Equipment Port
Specification
(Default)
Option Note
CIF/NMEA NMEA CIF
Select to Jumper setting in CONT
board and System setting
(9:System)
DMC(REM-A) C.Loop None
NBDP(REM-C) RS-232C None
MF/HF
RT(REM-D)
RS-232C None
MF/HF
RX(REM-E)
RS-232C None
DSC-6/6A
PRINTER Centronics None
Complies with Centronics
interface
CIF/NMEA NMEA CIF
Select to Jumper setting in CONT
board and System setting
(9:System)
DMC(REM-A) C.Loop None
VHF(REM-B) C.Loop None
DSC-8V/8VP
PRINTER Centronics None
Complies with Centronics
interface
DSC RS-232C None
AA-50/50R
MF/HF TR RS-232C None
REMOTE 1 C.Loop None DSC port
FM-7000
REMOTE 2 C.Loop None RB-700 port
REMOTE C.Loop None RB-700 port
DMC C.Loop None
CIF/NMEA NMEA CIF
FM-7500
PRINTER Centronics None
Complies with Centronics
interface
REMOTE 1 C.Loop None DSC port
FM-8000
REMOTE 2 C.Loop None RB-700 port
REMOTE C.Loop None RB-700 port
DMC C.Loop None
NMEA NMEA None
FM-8500
PRINTER C.Loop None
MIF Serial data (Install to
IF-8500; Change to parallel)
REMOTE C.Loop None RB-700 port
DMC C.Loop None
NMEA NMEA None
FM-8700
PRINTER C.Loop None
MIF Serial data (Install to
IF-8500; Change to parallel)