Furuno FS-5000 User Manual

i
GMDSS equipment key points
Equipment Menu (Item) Pass word/key point Note
[SELECT] “PRG” System settings
[SETUP] [4]:XMITR
Re-enter the MMSI
Ignore ID ON
[SETUP] “I”, enter to
“652111”
Selection of VHF or
MF/HF
[SETUP] [5]:SCAN Set the RX SCAN
frequency as “99999.9”.
To canceling SCAN
frequency
DSC-5
[SETUP] [1]:Position [SELECT] [1];
Set the UTC as “9999”.
To canceling manual
position data.
[SELECT] [9] :System System settings
[SELECT] [
!
]:dimmer
[SELECT] [9] “P”, enter
to
“652111”.
For test
[SELECT] [0]:SCAN Set the RX SCAN
frequency as “99999.9”.
To canceling SCAN
frequency
[SELECT] [1]:Position [SELECT] [1];
Set the UTC as “9999”.
To canceling manual
position data.
DSC-6
[SELECT] [9] “MMSI”
(Re-enter the MMSI)
EEROM clear
(NMI SW ON)
Ver-1.05 and after
[SELECT] [9]:System System settings
[SELECT] [
!
]:dimmer For test
[SELECT] [8]:Receiver
[SELECT] [9] “P”,
enter to “652111”.
Selection of VHF or
CH70
DSC-8V
[SELECT] [1]:Position [SELECT] [1];
Set the UTC as “9999”.
To canceling manual
position data.
[SETUP] “System” [SETUP] “Protection”,
enter to “652111”.
System settings
Re-enter the MMSI EEROM clear
(NMI SW ON), enter to
“652111”
DSC-60
Confirmation of present Version
number
[3]:TEST, press [1] key
five times while pressing
[#FILE] key.
[SELECT] [9] :System System settings
[SELECT] [
!
]:dimmer
[SELECT] [9] “P”,
enter to “652111”.
For test
[SELECT] [1]:Position [SELECT] [1];
Set the UTC as “9999”.
To canceling manual
position data.
[SELECT] [9] “MMSI”
(Re-enter the MMSI)
FM-8500
[SELECT] [9] “private”
EEROM clear
(NMI SW ON)
DSC Ver-03 and later.
[SELECT] [9] :System System settings
[SELECT] [
!
]:dimmer
[SELECT] [9] “P”,
enter to “652111”.
For test
[SELECT] [1]:Position [SELECT] [1];
Set the UTC as “9999”.
To canceling manual
position data.
[SELECT] [9] “MMSI”
(Re-enter the MMSI)
FM-8700
[SELECT] [9] “private”
EEROM clear
(NMI SW ON)

Furuno FS-5000 Specifications

General

Brand	Furuno
Model	FS-5000
Category	Marine Equipment
Language	English