Furuno FS-5000 User Manual

iii
Equipment Menu (Item) Pass word/key point Note
AT-1560 Self test
Turn on No.2 of the dip
SW S2 in the ATU, then
press the TUNE SW in the
ATU.
To conform System
settings [RCL] 9999
[ENT].
System settings menu.
[STO] “system setting
item No.” [ENT] “ setting
No.” [ENT].
To conform user CH
setting [RCL] 9998
[ENT].
Channel presetting
To preset;
[STO] “CH No.” [ENT]
[ENT].
To eras;
[STO] “CH No.” [ENT]
[0] [ENT].
Power adjustment
FULL power;
[STO] [FULL] adjust to
power by [FULL] or
[UP] key.
LOW power
[STO] [LOW] adjust to
power by [FULL] or
[UP] key.
FS-
5000/8000
BFO setting [STO] [BFO] To keep ”1700Hz”.
[F5] 6: AAB
Re-enter AAB;
Type “ANSWER CODE”
(Type Cap. letter)
[F5] 7, 8, 9, 0: IDs
Re-enter IDs;
Type “ID CODE”
(Type Cap. letter)
[F6]:Terminal
DP-5
[F8]:System
Changing system settings
Type “DP5”
(Type Cap. letter)
[F5] 5: AAB
Re-enter AAB;
Type “ANSWER CODE”
(Type Cap. letter)
[F5] 6, 7, 8, 9: IDs
Re-enter IDs;
Type “ID CODE”
(Type Cap. letter)
[F6]: System
Changing system settings
Type “DP6”
(Type Cap. letter)
Quit to application softwear. [Fn ]+ [F2] + [Alt] Ver 16 or later
Terminal program update. B:\>install
Main program up date.
B:\>
Type “nbdpinst”,
press [F1],
type “nbdp.exe”.
DP-6
Printer and Language settings.
[Fn ]+ [F1], type “DP6”.
(Type Cap. letter)

Furuno FS-5000 Specifications

General

Brand	Furuno
Model	FS-5000
Category	Marine Equipment
Language	English