99
6 Modifications to the basic vehicle
6.9 Seats and bench seat
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
6.9 Seats and bench seat
The retrofitting of original seats and/or bench seats is
only permitted and possible if the necessary
preinstallations exist in the vehicle, such as suitable
floor assembly, reinforced cab/cab suspension. For
all other seat retrofittings, corresponding evidence
(belt checks, tensile tests) is required as part of an
endorsement check carried out by the department
responsible É 2.1.
a Risk of injury
Modifications to or work incorrectly carried out on
a restraint system (seat belt and seat belt
anchorages, belt tensioner or airbag) or its wiring,
could cause the restraint systems to stop
functioning correctly, e.g. the airbags or belt
tensioners could be triggered inadvertently or could
fail in accidents in which the deceleration force is
sufficient to trigger the airbag. For this reason,
never carry out modifications to the restraint
systems.
Comply with all national regulations and directives.
To Next Page
Loading...