102
6 Modifications to the basic vehicle
6.11 Brake systems
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
6.11 Brake systems
All accident prevention regulations must be complied
with when working on the vehicle.
Comply with all national regulations and laws.
ESP (Electronic Stability Program)
<Vehicle with ESP>
• Be sure not to change the motor generator power,
transmission, final ratio (except option), tire size,
suspension system or wheelbase.
• Be sure not to alter ESP-associated devices,
sensors, harnesses or connectors in any way.
Disc brake
a Risk of accident
Work carried out incorrectly on the brake system
may impair its function. This may lead to the failure
of components or parts relevant to safety. This
could cause you to lose control of the vehicle and
cause an accident with possible injury to yourself
and others.
i Additional information
After any modifications the brake system must be
tested for proper operation and approved by a
technical inspection authority otherwise the
operating permit will be invalidated.
Further information can be found in Section 5
"Damage prevention" É 5.1.
! Property damage
Do not impede cooling by attaching spoilers below
the bumper, additional hub caps or brake disc
covers, etc.
To Next Page
Loading...