22
3.1 Selecting the chassis
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
3.1 Selecting the chassis
In order to ensure safe operation of the vehicle, it is
essential to choose the chassis and equipment care-
fully in accordance with the intended use.
Along with the selection of the correct vehicle version,
the required series and special equipment such as
•Axle ratio
• Position of the center of gravity
• Legal registration requirements
(e.g. Underrun protection)
• Permissible and technical gross vehicle weight
should be taken into consideration and be appropriate
for the intended use.
<Vehicle with LDWS> (lane departure warning system)
LDWS may be disabled in the following cases:
• Any item which interferes with the camera’s field of
view exists near the camera.
• Any equipment (snowplough, etc.) is attached in
front of the vehicle.
! Property damage
When planning attachments, bodies, equipment or
modification work, the selected vehicle must be
checked to verify whether it fulfils the necessary
requirements.
! Property damage
Observe the Model. The axle designation or the load
capacity of the tires has only limited relevance to
the gross weight of the vehicle.
3 Planning of bodies
i Additional information
The non-availability of a vehicle version may be an
indication that the vehicle is not suitable for the
intended application.
To Next Page
Loading...