10
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
1Introduction
1.5 Accident prevention
1.5 Accident prevention
Observe the requirements and precautions set out in
this manual when carrying out body-building work or
modification work.
The body, the attached or installed equipment and any
modifications must comply with the applicable laws
and ordinances as well as work safety or accident
prevention regulations, safety rules and accident
insurer requirements.
All technical means shall be used to avoid operating
conditions that may be unsafe or liable to cause an
accident.
All national laws, directives and registration
requirements must be complied with.
The manufacturer of the attachment, body, equip-
ment or conversion or the device manufacturer is
responsible for compliance with these laws and
regulations.
To Next Page
Loading...