Fuso eCANTER - Specifications

10 Technical data
10.2 Specifications
T2
MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020
! Only print out complete sections from the current version
10.2 Specifications
10.2.1 Specifications
Model FEB7UERBSFA2
Wheelbase (mm) 3400
Tread (mm) Front 1665
Rear 1560
Curb weight (kg) 3280
Front 1900
Rear 1380
Max. GVW 7500
Front 3100
Rear 6000
Motor model S30
Max. output (EEC) 135 kW / 10000 rpm
Max. torque (EEC) 390 Nm / 0 to 3100 rpm
Reduction gear EZ-12
Gear ratio 2.68
Propeller shaft P3
Transfer -
Rear axle R035T
Final reduction gear D035H
Ratio 6.666
Front axle F350T
Tire 205/75R17.5 124/122 M
Wheel 17.5 x 6.00 - 127
Steering angle (in/out) 45°/34°
Service brake
hydraulic vacuum assisted 2 circuit
split system
Parking brake
Mechanical, internal expanding
type mounted on the rear end of
the transmission case
Front suspension
Semi-elliptic laminated leaf spring
with shock absobers and stabilizer
Rear suspension
Semi-elliptic laminated leaf spring
with shock absobers and stabilizer
Electrical
DC/DC
convertor
12 V-210A
Batteries 12 Volts (100AH-760A (EN)x2)
Cab Wide, Single
Crew 3