Fuso eCANTER - Advanced Emergency Braking System (AEBS)

34
3 Planning of bodies
3.9 Advanced Emergency Braking System (AEBS)
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
3.9 Advanced Emergency Braking System (AEBS)
<Vehicle with AEBS>
Active Brake assist operates when there is a danger of collision with the vehicle, and it helps to alleviate collision
damage.
• Place the starter switch in the "OFF" position before disconnecting the harness connector of the system
control unit.
• For precautions when performing electric welding, refer to 5.2 "Welding work" É 5.2.
• Radar unit and radar unit cover may cause trouble if repainted.
Mask these parts and components before starting painting to protect them against paint spray.
Remove radar unit if forced drying around radar unit.
• Contact a MITSUBISHI FUSO authorized Distributor to have calibration of radar if radar unit removed.
• Change to new radar unit if radar get damaged due to fallen
• Do not put any equipment in front of radar view area (fig. radar view area).