33
3 Planning of bodies
3.8 Maintenance and repairs
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
3.8.4 Work before handing over the modified
vehicle
The manufacturer must confirm the work and
modifications carried out by making an entry in the
Service Booklet.
Checking the overall vehicle
Check the vehicle for perfect condition. All damage
must be repaired.
If it is not known how long a vehicle equipped with a
hydraulic clutch operating system has been in storage,
the brake fluid must be renewed.
Checking the batteries:
Test the battery charge before handing over the
vehicle.
Checking the tires
Before handing over the vehicle, check that the tires
are inflated to the specified pressure and check the
tires for damage. Damaged tires must be replaced.
Checking wheel alignment
When equipment, attachments and bodies have been
mounted, it is recommended to have the toe setting
checked by a qualified specialist workshop. MITSU-
BISHI FUSO recommends an authorized MITSUBISHI
FUSO dealer for this work.
It is absolutely essential that all safety-relevant work
and all work on safety-relevant systems is performed
by a qualified specialist workshop.
i Additional information
Further details are available from an Authorized
MITSUBISHI FUSO dealer.
To Next Page
Loading...