35
3 Planning of bodies
3.10 Lane Departure Warning System (LDWS)
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
3.10 Lane Departure Warning System (LDWS)
<Vehicle with LDWS>
The lane departure warning system alerts the driver with a warning display and buzzer if the driver has left their
lane unintentionally.
• Place the starter switch in the "OFF" position before disconnecting the harness connector of the system
control unit.
• For precautions when performing electric welding, refer to 5.2 "Welding work" É 5.2
• Camera unit may cause trouble if repainted.
Mask camera unit before starting painting to protect them against paint spray.
• Check if lane detection is displayed to meter cluster correctly if camera unit removed.
(Clear lane marking and vehicle speed is over 60km/h).
Contact a MITSUBISHI FUSO authorized Distributor if lane cannot be detected.
• Change to new camera unit if camera get damaged due to fallen
• Do not put any equipment in front of camera view area (fig. radar view area).
To Next Page
Loading...