38
4.1 Vehicle overhang and technical wheelbases
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
4.1 Vehicle overhang and technical wheelbases
• When calculating the length of the vehicle
overhang, always take into account the permissible
axle loads and the minimum front axle load.
• Comply with the minimum front axle load É 4.3.
• Take the weight of special equipment into consid-
eration when making calculations.
4 Technical threshold values for planning
a Risk of accident
The body must be designed in such a way that a
placing of excessive load weight at the rear is
prevented. It is important to comply with the points
listed below, otherwise the necessary steering and
braking forces for safe vehicle operation cannot be
transferred to the road.
To Next Page
Loading...