41
4 Technical threshold values for planning
4.3 Steerability
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
4.3 Steerability
To ensure sufficient vehicle steerability, the minimum
front axle load (25% of gross vehicle weight) must be
maintained under all load conditions. Consult the
department responsible in the event of any deviations
É 2.1.
Observe the notes on product safety É 2.2.
a Risk of accident
The body must be designed in such a way that a
placing of excessive load weight at the rear is
prevented. The following points must be complied
with otherwise the steering and braking forces
necessary for safe driving cannot be transmitted.
! Property damage
The permissible front axle load must not be
exceeded.
To Next Page
Loading...