56
5 Damage prevention
5.3 Corrosion protection measures
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
5.3 Corrosion protection measures
General
In order to preserve the durability and quality standard
of the vehicle, measures must be taken to protect it
against corrosion when the vehicle is modified and
after installing bodies and fittings.
Information on the design, execution of work and the
requirements of the materials and components to be
used with regard to corrosion protection is listed
below.
To achieve good corrosion protection, the areas of
design (1), production (2) and materials (3) must be
perfectly matched.
Materials
Design Production
Corrosion
protection
Optimum corrosion protection
To Next Page
Loading...