84
6 Modifications to the basic vehicle
6.5 Modifications to the wheelbase
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
6.5 Modifications to the wheelbase
The wheelbase should not be extended or shortened
because considerations for the propeller shaft length,
balance, position, brake piping and harness length are
required.
If this is unavoidable, contact the department
responsible É 2.1.
6.5.1 Prohibition on modifying the propeller
shaft
a Risk of accident
It is strictly prohibited to modify the propeller shaft
by welding or other means to change its length.
An improperly modified propeller shaft may cause
vibration during operation, which in turn may cause
cracks and fractures in the motor generator, sepa-
ration of the propeller shaft, and other dangerous
conditions, possibly resulting in a serious accident.
To Next Page
Loading...