Fuso eCANTER - Page 104

103
6 Modifications to the basic vehicle
6.11 Brake systems
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
6.11.1 Chassis tubing form and dimension
specifications
The chassis uses steel brake lines which conform to
the following specifications.
(Double Flare type) Unit: mm
(ISO flare type) Material is the same as Double Flare types. Unit: mm
D4 is an outside diameter on the sealing surface. The
surface-roughness is
Double flare type Unit: mm ISO flare type Unit: mm
Fig. 1
Nominal
diameter
A B t C S
min.
Material
4.75
4.76
6.6-7.1 3.0-3.7 0.7 1.4 1.0 SPCC (JIS)
(ASTM A109 or A366)
Double walled steel
tubes
6.35 8.6-9.1 4.5-5.2 0.7 1.4 1.0
Nominal
diameter
D1 D2 D3 D4 min. T L
4.75
4.76
4.83-4.69 7.28-6.92 3.5-3.0 4.7 0.77-0.63 2.8-2.2
6.35 6.42-6.28 8.98-8.62 5.1-4.6 6.3
4
5
°
2
°
9
0
°
3
0
°
N42.50-2019-00
S
C
B
D
T
A
R1 (0.04)
1
1
1 This surface must be smooth
N42.50-2020-00
D
3
D
1
T
D
4
D
2
R 0.45 0.15
1
1
5
°
2
°
L