14
2General
2.2 Product safety
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
Be careful of the following points when carrying out
body-building or modification work.
Safety design
• Securing adequate safety and reliability, and
preparing safety devices (design which is fail-safe
and takes account of misoperation and misuse,
safety evaluation)
• Storing technical material, drawings and
documents during development
Manufacturing quality
• Manufacturing according to the drawings in order
to prevent errors, missing parts and defective
assembly, and secure high manufacturing quality
• Implementing a quality confirmation inspection,
and storing the records of the inspection
Use the post-body-building/modification
inspection sheet.
Preparing an instruction manual and warning
indications
• Instruction manual
Concrete indication of the effect of incorrect
operation on the human body, the vehicle, and
other locations (elimination of indications that are
likely to cause misunderstanding, and also
ambiguous expressions)
• Warning indications
To ensure that the vehicle is used as safely as
possible, warning indications must use expressions
that are easy to understand and letters that are
large enough to read easily, include pictures, and
be applied to locations that are readily visible to the
driver.
To Next Page
Loading...