Timer Function
Timer selection
First, select the type of timer
at the "Mode" item. The setup
screen varies depending on the
type of timer. This figure shows
the Up timer setup screen.
(Preparation)
Assign the "Timer start" switch using the function select switch
(p.99). When resetting by switch, assign "Lap reset" also.
1
(Racing timer type selection)
Select the setting item "Mode" by (JOG) button up, down,
left, or right operation. Press the (+) or (-) button and set the
racing timer type.
Timer selection (TYPE)
Up timer
Fuel down timer
Lap timer
Lap navigate timer
Racing timer type selection
Time display
Minute display (m)
Second display (s)
1/100 second display
Setup item selection
- Select by (JOG) button up,
down, left or right operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
2
When ending setting, return to the menu screen by pressing the (END) button.
To Next Page
Loading...