System menu
Setup item selection
- Select by (JOG) button up, or
down operation.
-Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) but-
tons simultaneously (approx.
1 sec).
Setup item
Normal volume (key,trim)
Warning
Voice volume
146
Sound setting
This setting is displayed from the screen of the system menu.
Sound Setting
This function can set the volume of "Key Operation", "Warning" and "Telemrtory speech
info".
-The volume of the click when edit key, jog, and trim are operated can be adjusted.
-The volume of the audible alarm sound can be adjusted.
-When the telemetry function is used, the volume of the voice that announces the tempera-
ture, speed, voltage, and other information at a xed interval can be adjusted.
1
(Adjusting the key operetion volume)
Select the "Normal volume" to be set by (JOG) button opera-
tion,
and use the (+) and (-) buttons to adjust the volume.
2
(Adjusting the warning volume)
Select the "Warning volume" to be set by (JOG) button op-
eration,
and use the (+) and (-) buttons to adjust the volume.
3
(Adjusting the voice volume)
Select the "Voice volume" to be set by (JOG) button opera-
tion,
and use the (+) and (-) buttons to adjust the volume.
Volume adjustment
Normal volume
0~32
Initial value: 16
Voice volume
0~32
Initial value: 16
Warning volume
1~32
Initial value: 16
4
When ending setting, return to the system menu screen by pressing the (END) button.
To Next Page
Loading...