Data Reset
Data Reset
Select the reset type by (JOG) button up or down operation
and press the (JOG) button.
1
(Reset execution)
Pressthe(JOG)button.The"Areyousure?"conrmation
message appears. To execute, select "Yes" and to cancel
select "No" and press the (JOG) button.
This completes resetting.
Data Reset
This function resets the contents of the currently called model memory.
The reset method can be selected from among the 3 types described below. These resets
do not initialize the adjuster function, system function, user name, and receiver type, servo
type selection function.
Model data
Initializes only the function setting data. The direct menu function is not initialized.
Direct menu
Initializes the direct menu function. Other settings are not initialized.
All data
Initializes the menu function, direct selection function, and the setting data of each function.
Setup item selection
- Select by (JOG) button up or
down operation.
Reset execution button
- (JOG) buttons pressed.
Reset type selection
2
When ending setting, return to the menu screen by pressing the (END) button.
To Next Page
Loading...