1 SPEED
A delay is set over the entire
2 SPEED
A delay can be set in 2 ranges
3 SPEED
A delay can be set in 3 ranges with
-Throttle servo (ESC) operation is delayed so that the drive wheels will not spin even if the
trottle trigger is operated more than necessary. This delay function is not performed when
the throttle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
Operation
Mode selection
One speed, 2 speed, or 3 speed can be selected at the "Mode" item.
The setting item (screen) depends on the mode. The figure at the
above is the 3 speed setup screen.
With "Throttle speed":
Quick start without skidding
Without "Throttle speed":
Slow start due to skidding
Throttle Speed
Throttle Speed
(Throttle system)
Sudden throttle trigger operation on a slippery road only causes the wheels to spin and the
vehicle cannot accelerate smoothly. Setting the throttle speed function reduces wasteful bat-
tery consumption while at the same time permitting smooth, enjoyable operation.
To Next Page
Loading...