FUTABA T10PX - LED Setting

57
Returntotableofcontents
SYSTEMMENU
Home screen Menu screen
Menu-1 Menu-2
LED setting
System menu screen
You can adjust the brightness and lighting method of the pilot LED light.
The pilot LED lighting method can be selected from
"
Always On
"
,
"
2൵
"
or
"
Backlight
"
.
LED Setting
1
(Setting pilot LED)
Tap the [Pilot LED], a list of lighting mode will be displayed on the screen. tap the lighting
mode you want to use from the list.
LED setting
2
(Setting Pilot LED brightness)
Tap the value button of the [Brightness]. Value input buttons
appear on the screen and use the [+] and [-] buttons to ad-
just the pilot LED brightness amount.
3
When finished, return to the System menu screen by pressing the HOME button.
Pilot LED mode
Backlight, Always On, OFF
*Backlight:
The lighting of the LED works with
the backlight.
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Brightness
0~20
Initial value: 10