FUTABA T10PX - Sensor

168
Returntotableofcontents
TELEMETRYMENU
Sensor
With this menu, you can display the telemetry meter on the home screen.
Also, you can register a telemetry sensor in the transmitter. When using each sensor of
the initial setting one by one, setting here is unnecessary. You can use it by connecting
the purchased sensor to the S.BUS 2 port of the receiver. If you use multiple sensors of
the same type, such as temperature sensor for both battery and motor, you need to reg-
ister that sensor in the transmitter.
Home screen
Menu screen Telemetry menu screen Sensor
Display of sensor list screen
Register multiple sensors of the same type
Register one additional sensor of the same type
Change slot number of one registered sensor
Read voice guide and set interval time
Setting the recording interval time for log data