FUTABA T10PX - 119

119
Returntotableofcontents
Without "A.B.S."
With "A.B.S."
A.B.S ON/OFF is indicated on
the home screen for a few sec-
onds.
It is displayed in the home screen.
When the A.B.S is ON.
Servo travel
Trigger operation
Trigger point
X: (Brake application time)
A.B.S.
Cycle speed
Duty ratio: X and Y ratio
Y:
(Brake return time)
B rake
return
Servo travel
Trigger operation
Trigger point
X: (Brake application time)
A.B.S.
When the brakes are applied while cornering with a 4-Wheel
Drive or other types of vehicles, understeer may occur. The
tendency to understeer can be eliminated and corners can be
smoothly cleared by using this function.
- When the brakes are applied, the throttle servo will pulse in-
WHUPLWWHQWO\ZLOOKDYHWKHVDPHH൵HFWDVSXPSLQJWKHEUDNHVLQ
a full-size car
- The brake return amount, pulse cycle, and brake duty can be
adjusted.
%\VHWWLQJWKHEUDNHPL[LQJIXQFWLRQ0L[LQJPHQXLWFDQ
DOVREHVHWIRUWKHQGDQGUGDX[LOLDU\FKDQQHOEUDNH
Operation
- Mode: Function ON/OFF
ABS function ON/OFF setting.
When using the ABS function, set to
"
ON
"
.
- Brake return
Sets the rate at which the servo re-
turns versus trigger operation for
brake release. When set to 0%, the
ABS function is not performed.
When set to 50%, the servo returns
50% (1/2) of the trigger operation
amount, and when set to 100%, the
servo returns to the neutral position.
RACING MENU
Home screen
Menu screen Racing menu screen A.B.S.