Operators and Technicians Manual
2011 – 2014 FutureLogic, Incorporated. All Rights Reserved. MNL Page 29 04/10/2014
MNL-000067 REV.X03
3. (For first-time use only) The Windows Device Manager shows the printer when connected for the first
time as unrecognized devices:
• FL GEN3 USB PRINTER: Use as a virtual COM port.
• FLI-CDC-DFU 1.1.v: Use for Device Firmware Upgrade.
Figure 9-2 Device Manager – Other Devices
4. Right-click FL GEN3 USB PRINTER; use the CDC driver package to install manually the virtual
COM port.
Figure 9-3 Device Manager
5. (Optional) Install the DFU Device Firmware Upgrade drivers. See page 22 for details.
The printer is now ready for use via its Virtual Communication Port. Note the COM port number.
To Next Page
Loading...
