Galil Motion Control DMC-1000 - Accessories, Options, and Product Comparison

154 • Appendices DMC-1000
W offset Used to null ACMD offset for W axis
Note: These adjustments are made at the Galil factory and should need adjustment under most
applications.
Accessories and Options
DMC-1010 Single Axis Controller
DMC-1020 Two-Axis Controller
DMC-1030 Three-Axis Controller
DMC-1040 Four-Axis Controller
DMC-1050 Five-Axis Controller
DMC-1060 Six-Axis Controller
DMC-1070 Seven-Axis Controller
DMC-1080 Eight-Axis Controller
ICM-1100* Interface board
AMP-1110 Single axis amplifier
AMP-1120 Two-axis amplifier
AMP-1130 Three-axis amplifier
AMP-1140 Four-axis amplifier
-MX option Memory expansion option to 2000 lines, 8000 array elements, 254 labels and 254
variables
-AF option Analog feedback option. Uses analog feedback for servo loop.
DB-10096 Auxiliary board for additional 64 inputs, 32 output I/O. Can be configured for other
sensors.
N23-54-1000 Servo motor; NEMA 23; 54 oz-in continuous
N34-150-1000 Servo motor; NEMA 34; 150 oz-in, continuos
COM-Disk MS-DOS Terminal Emulator and Software Sources
SDK-1000 Servo Design Software
OPINT Operator Interface Software for PC
CAD-to-DMC Autocad to DMC Translator
VBX Toolkit Visual Basic VBX Extensions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com