Garmin GPSMAP 4208 - Page 29

GPSMAP 4000 Series Owner’s Manual 25
Where to?
Where
to?
6. Select Done to nish the route or Cancel Route to delete the route.
To create a route in another location:
1. From the Home screen, select Information > User Data > Routes > New Route.
2. By pressing the ROCKER, use the map pointer ( ) to select the initial location you want to start
the new route.
3. Select Add Turn to mark the starting point of the route.
4. Choose the location of the rst turn and select Add Turn. Repeat until the route is complete.
5. Select Done when the route is complete.
To create a route using Auto Guidance:
1. From the Navigation chart, select your destination.
2. Select Navigate To > Guide To. Your route is calculated.
NOTE: You can change the auto guidance path to a route by selecting the end of the path and selecting
Navigate To > Route To. The auto guidance path stays on the screen, allowing you to trace it while
creating a route.
To edit a route
1. From the Home screen, select Information > User Data > Routes.
2. Select the route to edit.
3. Select Edit Route. You can edit the route name, turns, or delete the route.
To bypass a waypoint on a route:
1. Create a route as previously described.
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select Navigate To > Go To (or Route To).
www.reelschematic.com
www.reelschematic.com