Garmin GPSMAP 4208 - Where To?; Navigating to Destinations

20 GPSMAP 4000 Series Owner’s Manual
Where to?
Where
to?
Where To?
Use the Where To? option on the Home screen to search for and navigate to nearby fuel, repairs,
services, waypoints, and routes.
NOTE: You must create waypoints and routes before you can navigate to them.
You can navigate to a destination using one of three methods: Go To, Route To, or Guide To.
Go To—takes you directly to the destination.
Route To—creates a route from your location to a destination, allowing you to add turns to the
route.
Guide To—searches BlueChart g2 Vision chart data to suggest the best path to your destination.
You must be using a BlueChart g2 Vision SD card for this option to appear.
CAUTION: Guide To does not assure obstacle and bottom clearance. For safety, always resolve any
discrepancies or questions before continuing navigation.
Navigating to a Destination
You can navigate to a destination using one of three methods: Go To, Route To, or Guide To.
Go To—takes you directly to the destination.
Route To—creates a route from your location to a destination, allowing you to add turns to the
route.
Guide To—searches BlueChart g2 Vision chart data to suggest the best path to your destination.
You must be using a BlueChart g2 Vision SD card for this option to appear.
CAUTION: Guide To does not ensure obstacle and bottom clearance. For safety, always resolve any
discrepancies or questions before continuing navigation.
To begin navigating:
1. From the Home screen, select Where To?.
2. Select the marine service category to which you want to navigate. The unit shows the list of the
50 nearest locations and the distance to each.
•
•
•
•
•
•
www.reelschematic.com
www.reelschematic.com