Message Log (MSG) Function
The Message function displays information about the
status of the MX20. Messages may be logged by either the
MX20 internal system or by one of the external sensors.
The amber MSG flag will flash until the message is
viewed. The MSG flag will remain in view while any
messages remain in the message log. New messages that
have not been viewed will be highlighted as bold text.
1. Press
FN until you see the MSG function key.
2. Press the
MSG key.
3. Use the
UP/DOWN arrow “smart” keys to move to
additional messages, if more than one page of messages
exist.
4. Press
CLEAR to remove the stored messages.
20
Detailed Operation
To Next Page
Loading...
